Printable On-line Catalogue
|
Auger Bits A fully hardened, high performance drill bit with screw centre point. For use in wood and wood like materials only.
|
 |
|
SDS Auger Bits A fully hardened, high performance drill bit with screw centre point and a SDS shank. For use in wood and wood like materials only.
|
 |
|
Bi Metal Hole Saw Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron or similar materials. Check out our hole saw accessories category for arbor's, extension shanks and spare pilot drills. Arbor's are not included in the prices above.
|
 |
|
Hole Saw Accessories Arbor A ~ Suitable for use with hole saws between 14-30mm. Arbor A has a 1/4 round shank. Arbor B ~ Suitable for use with hole saws between 14-30mm. Arbor B has a 7/16 hex shank. Arbor C ~ Suitable for use with hole saws between 32-152mm. Arbor C has a 7/16 hex shank. Note: All Arbors include a pilot drill. We also have extra pilot drills available for purchase below.
|
 |
|
Hole Saw Extension Shank
|
 |
|
8pc Hole Saw Set Set contains: 20/29/35/44/51/64mm hole saws plus the 2 arbors and pilot drills required. Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron, stainless steel or similar materials.
|
 |
|
13pc Hole Saw Set Set contains: 20/22/25/32/35/38/44/51/57/64/76mm hole saws plus the 2 arbors and pilot drills required. Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron, stainless steel or similar materials.
|
 |
|
Reduced Shank Drill Bits A reduced shank, hot rolled, HSS drill bit. Shank diameter varies from 8mm to 13mm. For use with steel, plastic and wood like materials.
|
 |
|
Reduced Shank Drill Bits A reduced shank, hot rolled, HSS drill bit. Shank diameter varies from 5/16" to 1/2" For use with steel, plastic and wood like materials.
|
 |
|
Blacksmith Drills (Metric) A reduced shank, hot rolled, HSS drill bit. Shank diameter reduced to 12.7mm Spiral length 90mm For use with steel, plastic and wood like materials.
|
 |
|
Blacksmith Drills (Imperial) A reduced shank, hot rolled, HSS drill bit. Shank diameter reduced to 1/2" Spiral length 90mm For use with steel, plastic and wood like materials.
|
 |
|
TCT Core Drills Heavy duty, Tungsten carbide tipped core drills. For cutting fast clean holes in concrete, brick & aerated block.
|
 |
|
Core Drill Accessories Adaptors can be used with any of our TCT core drills. A pilot drill must be bought with the adaptor if you don't already have any.
|
 |
|
Diamond Core Drills Diamond core drill - laser welded For cutting fast clean holes in concrete, brick & aerated block.
|
 |
|
Diamond Core Drill Set 11PC Turbo Diamond Core Drill Set Laser welded Contains dry diamond core drills 38 x 150mm - 52 x 150mm - 65 x 150mm - 117 x 150mm - 127 x 150mm Short and long SDS+ adaptors Short and long hexagon adaptors for use with 1/2" chuck A-taper pilot drill 200mm long Drift key
|
 |
|
Diamond Core Drill Accessories Adaptors can be used with any of our TCT core drills. A pilot drill must be bought with the adaptor if you don't already have one.
|
 |
|
Metal Cutting Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Metal Grinding Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Stone Grinding Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Stone Cutting Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Diamond Cutting Discs for Tiles High quality, laser welded, dry cutting disc. Offers significantly better performance than standard cutting discs. Dimesions listed below are, diameter x bore.
|
 |
|
Diamond Cutting Discs for concrete and brick High quality, laser welded, dry cutting disc. Offers significantly better performance than standard cutting discs. Dimesions listed below are, diameter x bore.
|
 |
|
19pc HSS Metal Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
21pc HSS Metal Set Contains sizes 1/16" - 3/8" increasing in increments of 1/64" For drilling steel, plastic, wood and similar materials.
|
 |
|
25pc HSS Metal Set Contains sizes 1.0mm - 13.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
29pc HSS Metal Set Contains sizes 1/64" - 1/2" increasing in increments of 1/64" For drilling steel, plastic, wood and similar materials.
|
 |
|
50pc HSS Metal Set Contains sizes 1.0mm - 6.0mm increasing in increments of 0.1mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
41pc HSS Metal Set Contains sizes 6.0mm - 10.0mm increasing in increments of 0.1mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc HSS Flat Set Contains sizes 1.5mm - 6.0mm increasing in increments of 0.5mm. Also contains sizes 3.2mm and 4.8mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc HSS Flat Set Contains sizes 2.0mm - 8.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc HSS Flat Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc Dial-A-Drill HSS Set Contains sizes 1/16 - 1/4 increasing in increments of 1/64 For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc Dial-A-Drill HSS Set Contains sizes 1.5mm - 6.5mm increasing in increments of 0.5mm. Set also includes sizes 3.2mm and 4.8mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc Dial-A-Drill HSS Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
170pc HSS Drill Magazine Contains sizes 1.0mm - 10.0mm, increasing in increments of 0.5mm. You will get 10 of each size ranging 1.0mm - 8.0mm. You will get 5 of each size ranging 8.5mm to 10.0mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
7pc HSS Flat Set Contains sizes 1.5/2/3/4/5/5.5/6mm For drilling steel, plastic, wood and similar materials.
|
 |
|
99pc HSS Drill Magazine (Titanium coated) Contains sizes 1.0mm - 10.0mm. You will get 16 of 1.5mm, 2.0mm. 15 of 2.5mm. 10 of 3.0mm, 3.2mm. 8 of 3.5mm, 4.0mm. 3 of 4.5mm, 5.0mm and 2 of 5.5mm, 6.0mm, 6.5mm, 8.0mm, 10.0mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc Cobalt Metal Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
99pc Cobalt Magazine Contains sizes 1.0mm - 10.0mm. You will get 16 of 1.5mm, 2.0mm. 15 of 2.5mm. 10 of 3.0mm, 3.2mm. 8 of 3.5mm, 4.0mm. 3 of 4.5mm, 5.0mm and 2 of 5.5mm, 6.0mm, 6.5mm, 8.0mm, 10.0mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
25pc Cobalt Metal Set Cobalt. 25pc. Contains sizes 1.0mm - 13.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
7pc SDS Drill Set Contains the following sizes 5/6/8mm x 110mm & 6/8/10/12mm x 160mm For drilling granite, concrete, masonry, tiles, plastic and similar materials.
|
 |
|
3pc Profi Masonry Set Contains the following sizes 8/10/12mm x 400mm. For drilling granite, concrete, masonry, tiles, plastic and similar materials.
|
 |
|
4pc Profi Masonry Set Contains the following sizes 5/5.5/6.5/7mm x 150mm. For drilling granite, concrete, masonry, tiles, plastic and similar materials.
|
 |
|
5pc Masonry Set Contains the following sizes 4/5/5.5/6.5/7mm For drilling granite, concrete, masonry, tiles, plastic and similar materials.
|
 |
|
5pc Masonry Set Contains the following sizes 4/5/6/8/10mm For drilling granite, concrete, masonry, tiles, plastic and similar materials.
|
 |
|
8pc Masonry Flat Set Contains sizes 3/4/5/6/7/8/9/10mm. A fully hardened high performance, percussion masonry drill bit, nickel plated with a tungsten carbide tip. For use in concrete, masonry, tile, plastics etc.
|
 |
|
8pc Wood Flat Set Contains sizes 3/4/5/6/7/8/9/10mm Fully hardened, high performance drill bits with centre point. For use in wood and wood like materials only.
|
 |
|
5pc Wood Set Contains sizes 4/5/6/8/10mm Fully hardened, high performance drill bits with centre point. For use in wood and wood like materials only.
|
 |
|
6pc Flat Bit Set Contains sizes 6.5/10/13/20/25/32mm Fully hardened high performance drill bit with centre point, titanium coated for longer life. For use in wood and wood like materials only.
|
 |
|
9pc HSS, Masonry & Wood Flat Set Flat set containing 3 HSS drill bits, 3 masonry drill bits, 3 wood drill bits (5-8mm). A variety of sizes ideal for drilling steel, masonry, wood, plastic and similar materials.
|
 |
|
18pc Dial-a-Drill HSS, Masonry & Wood Set Set containing 6 HSS drill bits, 6 masonry drill bits, 6 wood drill bits (3/4/5/6/8/10mm). Ideal for drilling steel, masonry, wood, plastic and similar materials.
|
 |
|
HSS Drill Bits Rolled high speed, straight shank HSS drill bit. Split point 118 degrees. For drilling steel, plastic, wood and similar materials. The dimensions listed below are diameter x overall length. For enhanced performance, check out our HSS Ground Drill Bits.
|
 |
|
HSS Drill Bits Rolled high speed, straight shank HSS drill bit. Split point 118 degrees. For drilling steel, plastic, wood and similar materials. For enhanced performance, check out our HSS Ground Drill Bits.
|
 |
|
HSS Long Drill Bits Fully ground, straight shank HSS drill bit split point 135 degrees. For drilling steel, plastic, wood and similar materials. The dimensions listed below are diameter x overall length.
|
 |
|
HSS Long Drill Bits Fully ground, straight shank HSS drill bit split point 135 degrees. For drilling steel, plastic, wood and similar materials.
|
 |
|
HSS Ground Drill Bits HSS fully ground drill bits, split point - 135 degrees. For drilling steel, plastic, wood and similar materials. For enhanced performance, check out our HSS titanium coated drill bits.
|
 |
|
HSS Ground Drill Bits HSS fully ground drill bits, split point - 135 degrees. For drilling steel, plastic, wood and similar materials. For enhanced performance, check out our HSS titanium coated drill bits.
|
 |
|
HSS Titanium Drill Bits HSS fully ground drill bit, split point - 135 degrees. Titanium coated for longer life. For drilling steel, plastic, wood and similar materials. For enhanced performance check out our Cobalt drill bit range. For drilling stainless steel, we recommend our TCT drill bits.
|
 |
|
HSS Titanium Drill Bits HSS fully ground drill bit, split point - 135 degrees. Titanium coated for longer life. For drilling steel, plastic, wood and similar materials. For enhanced performance check out our Cobalt drill bit range. For drilling stainless steel, we recommend our TCT drill bits.
|
 |
|
Cobalt Drill Bits Fully ground, high performance cobalt steel drill bit, manufactured with 5% cobalt split point 135 degrees. For use on alloy & hardened steel, cast iron and titanium. For drilling aluminium, we recommend our cobalt stub drill bits. For stainless steel, we recommend our TCT drill bits.
|
 |
|
Cobalt Drill Bits Fully ground, high performance cobalt steel drill bit, manufactured with 5% cobalt split point 135 degrees. For use on alloy & hardened steel, cast iron and titanium. For drilling aluminium, we recommend our cobalt stub drill bits. For stainless steel, we recommend our TCT drill bits.
|
 |
|
Cobalt Stub Drill Bits Fully ground, high performance stub cobalt steel drill bit, manufactured with 5% cobalt. For use on alloy & hardened steel, cast iron, titanium and aluminium. For drilling staineless steel, we recommend our TCT drill bits.
|
 |
|
Cobalt Stub Drill Bits Fully ground, high performance stub cobalt steel drill bit, manufactured with 5% cobalt. For use on alloy & hardened steel, cast iron, titanium and aluminium. For drilling staineless steel, we recommend our TCT drill bits.
|
 |
|
HSS Stub Drill Bits (Single) HSS fully ground stub drill bit. Used for drilling holes in steel and aluminium and similar materials Why not check out our double end stub drills (below) to save on cost?! Also check our our cobalt stub drill bits for increased performance.
|
 |
|
HSS Stub Drill Bits (Double) HSS fully ground stub drill bit. Used for drilling holes in steel and aluminium and similar materials Also check our our cobalt stub drill bits for increased performance.
|
 |
|
HSS Stub Imperial Drill Bits (Single Ended) HSS fully ground stub drill bit. Used for drilling holes in steel and aluminium and similar materials Why not check out our double end stub drills (below) to save on cost?! Also check our our cobalt stub drill bits for increased performance.
|
 |
|
HSS Stub Drill Bits (Double Ended) HSS fully ground stub drill bit. Used for drilling holes in steel and aluminium and similar materials Also check our our cobalt stub drill bits for increased performance.
|
 |
|
TCT Drill Bits Hss ground drill bit with a Tungsten Carbide Tip. Specially designed for drilling stainless steel.
|
 |
|
TCT Drill Bits Hss ground drill bit with a Tungsten Carbide Tip. Specially designed for drilling stainless steel.
|
 |
|
Spot Weld Drill Bits HSS E ground stub drill bit. Ideal for removing welding spots.
|
 |
|
Centre Drill Bits HSS fully ground centre drills. Ideal to accurately drill a centre hole, in preparation for a larger drill bit to be used. For drilling steel and similar materials. The dimensions listed below are: Pilot x Body x Length
|
 |
|
HSS Drills in (Single wallets) Rolled high speed, straight shank HSS drill bit. Split point 118 degrees. For drilling steel, plastic, wood and similar materials. The dimensions listed below are diameter x overall length. For enhanced performance, check out our HSS Ground Drill Bits.
|
 |
|
3pc Set HSS Step Drills - Titanium Coated to reduce friction and heat 3-20mm set includes: 3-12mm 10 Steps 4-12mm 5 Steps 4-20mm 9 Steps 4-32mm set includes: 4-12mm 5 steps 4-20mm 9 steps 4-32mm 15 steps
|
 |
|
HSS Step Drill HSS Step Drills - Titanium Coated to reduce friction and heat
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 36 Similar to Bosch T118G, AEG 274-652, Metabo 23 636, Holz Her ME 50 F
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 21 Similar to Bosch T118A, AEG 254-063, Metabo 23 637, Holz Her AK 50 M, Festo HS 50/1.2
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 13 Similar to Bosch T118B, AEG 254-064, Metabo 23 638, Holz Her ME 50 G, Festo HS/2
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 75mm Teeth per inch: 8 Similar to Bosch T127D, AEG 274-315, Metabo 23 639, Holz Her AL 75 G, Festo HS 75/3
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 100mm Teeth per inch: 21 Similar to Bosch T318A, AEG 274-654, Metabo 23 629, Holz Her AK 100 M
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 75mm Teeth per inch: 13 Similar to Bosch T101A, AEG 274-651, Metabo 23 640, Holz Her AL 75 F.
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 21 Similar to Bosch T218A, Metabo 23 647, Holz Her ME 50 M.
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 21 Similar to Bosch T118AF, AEG 340-011, Metabo 23 971.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 50mm Teeth per inch: 21 Similar to Bosch T119A, AEG 274-352, Metabo 23 630, Holz Her SP 50 F.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 50mm Teeth per inch: 13 Similar to Bosch T119B, AEG 274-353, Metabo 23 631, Holz Her SP 50 G.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 8 Similar to Bosch T111C, AEG 254-071, Metabo 23 632, Holz Her HO 75 R, Festo S 75/3
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 10 Similar to Bosch T101B, AEG 254-061, Metabo 23 634, Holz Her HO 75 F, Festo S 75/2.5
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 6 Similar to Bosch T101D, AEG 274-351, Metabo 23 635, Holz Her HO 75 G.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 6 Similar to Bosch T144D, AEG 213-116, Metabo 23 633, Holz Her HW 75 G, Festo S 75/4.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 6 Similar to Bosch T244D, AEG 346-078, Metabo 23 649, Holz Her HW 75 K, Festo S 75/4 K.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 10 Similar to Bosch T101BR, AEG 346-079, Metabo 23 650.
|
|
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 85mm Teeth per inch: 6 Similar to Bosch T301D, Metabo 23 654, Holz Her HO 90 G.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 6-21 Similar to AEG 265-312.
|
|
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 120mm Teeth per inch: 6 Similar to Bosch T344D.
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 50mm Teeth per inch: 21 Similar to Bosch T118B, Black & Decker.
|
 |
|
Jig Saw Blades for Metal Suitable for use on steel. Tooth length: 75mm Teeth per inch: 8 Similar to Bosch T118D, Black & Decker.
|
|
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 8 Similar to Bosch T111C, Black & Decker.
|
 |
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 10 Similar to Bosch T101B, Black & Decker.
|
|
|
Jig Saw Blades for Wood Suitable for use on wood. Tooth length: 75mm Teeth per inch: 6 Similar to Bosch T144D, Black & Decker.
|
 |
|
Profi Masonry Drill Bits A fully hardened high performance, percussion masonry drill bit, nickel plated with a tungsten carbide tip. For use in concrete, masonry, tile, plastics etc. For enhanced performance, check out our extreme masonry drill bit range.
|
 |
|
Extreme Masonry Drill Bits A fully hardened straight shank hammer drill bit. The spiral and tungsten carbide tip are exactly the same as on the SDS drill bits with the added benefit of titanium coating for longer life. For use in granite, concrete, masonry and tiles.
|
.jpg) |
|
Morse Taper Shank (Metric) HSS ground drill bit with a morse taper shank. To be used on steel and similar materials. Morse Taper Numbers: No.1 Morse Taper - 2.0 - 14.0mm No.2 Morse Taper - 14.25 - 23.0mm No.3 Morse Taper - 23.25 - 31.75mm No.4 Morse Taper - 32.0 - 50.5mm No.5 Morse Taper - 51.0 - 76.0mm No.6 Morse Taper - 77.0 - 100.0mm
|
 |
|
Morse Taper Shank (Imperial) HSS ground drill bit with a Morse Taper Shank. To be used on steel and similar materials. No 1 Morse Taper = 5/64 - 23/64 No 2 Morse Taper = 9/16 - 29/32 No 3 Morse Taper = 59/64 - 1.1/4 No 4 Morse Taper = 1 17/64 - 2†No 5 Morse Taper = 2 1/32 - 3†No 6 Morse Taper = 3 1/32 - 4â€
|
 |
|
Reduction Sleeve
|
 |
|
Slot Insert Bits Titanium coated screwdriver insert bits. Dimensions listed below are slot (mm) x overall length (mm).
|
 |
|
Pozi Insert Bits Titanium coated screwdriver insert bits. Dimensions listed below are Pozi (no.) x overall length (mm).
|
 |
|
Phillips Insert Bits Titanium coated screwdriver insert bits. Dimensions listed below are phillips (no.) x overall length (mm).
|
 |
|
Torx Insert Bits Titanium coated screwdriver insert bits. Dimensions listed below are torx (no.) x overall length (mm).
|
 |
|
Hex Insert Bits Titanium coated screwdriver insert bits. Dimensions listed below are Hex (no.) x overall length (mm).
|
 |
|
Double End Insert Bits Titanium coated double end screwdriver insert bits.
|
 |
|
Magnetic Adaptor
|
 |
|
Chrome Vandium Insert Bits
|
 |
|
SDS Plus Concrete Drills A fully hardened, high performance, hammer drill bit with tungsten carbide tip and sds plus shank. For use in granite, concrete, masonry, tiles, wood, plastic etc. This drill bit will fit in drill machines with an SDS Plus chuck only.
|
 |
|
SDS Max Concrete Drill A fully hardened, high performance, hammer drill bit with tungsten carbide tip and sds max shank. For use in granite, concrete, masonry, tiles, etc. This drill bit will fit in drill machines with an SDS MAX chuck only.
|
 |
|
SDS Chisels
|
 |
|
Hand Tap Sets HSS hand taps To cut threads in steel and similar materials. Each tap set below includes a 1st, 2nd and 3rd cut tap.
|
 |
|
M3 x 0.5mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M3.5 x 0.6mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M4 x 0.7mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M5 x 0.8mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M6 x 1.0mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M7 x 1.0mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M8 x 1.25mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
|
|
M10 x 1.5mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M12 x 1.75mm HSS hand taps To cut threads in steel and similar materials.
|
|
|
M14 x 2.0mm HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M16 x 2.0mm HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M18 x 2.5mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M20 x 2.5mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
|
|
M22 x 2.5mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
M24 x 3.0mm Hand Taps HSS hand taps To cut threads in steel and similar materials.
|
 |
|
Circular Dies HSS circular dies. Used for cutting threads.
|
 |
|
HSS Machine Taps HSS metric ground thread machine tap. Used for creating threads in steel and similar materials.
|
.jpg) |
|
Die Stock Diameter: 16 x 5mm Fittings: 1/16" - 3/32", 1 - 2mm For use with our circular dies
|
 |
|
Die Stock Diameter: 20 x 5mm Fittings: 1/8" - 5/32", 3 - 4mm For use with our circular dies
|
 |
|
Die Stock Diameter: 20 x 7mm Fittings: 3/16" - 1/4", 4.5 - 6mm For use with our circular dies
|
 |
|
Die Stock Diameter: 25 x 9mm Fittings: 5/16" - 11/32", 7 - 9mm For use with our circular dies
|
 |
|
Die Stock Diameter: 30 x 11mm Fittings: 3/8" - 7/16", 10 - 11mm For use with our circular dies
|
 |
|
Die Stock Diameter: 38 x 14mm Fittings: 1/2" - 9/16", 12 - 14mm For use with our circular dies
|
 |
|
Die Stock Diameter: 45 x 18mm Fittings: 5/8" - 3/4", 16 - 20mm For use with our circular dies
|
 |
|
Die Stock Diameter: 55 x 22mm Fittings: 7/8" - 1", 22 - 24mm For use with our circular dies
|
 |
|
Tap Wrench Number: 0 Fittings: 1/16" - 1/4", 1 - 8mm For use with our hand taps
|
 |
|
Tap Wrench Number: 1 Fittings: 1/16" - 3/8", 1 - 10mm For use with our hand taps
|
 |
|
Tap Wrench Number: 1.5 Fittings: 1/16" - 1/2", 1 - 12mm For use with our hand taps
|
|
|
Tap Wrench Number: 2 Fittings: 5/32" - 3/4", 4 - 12mm For use with our hand taps
|
 |
|
Tap Wrench Number: 3 Fittings: 5/32" - 3/4", 5 - 20mm For use with our hand taps
|
 |
|
Tap Wrench Number: 4 Fittings: 7/16" - 1", 11 - 27mm For use with our hand taps
|
 |
|
Tap Wrench with Ratchet No 2 Number: 2 Fittings: 7/32-1/2, 5mm - 12mm To be used with our hand taps to increase the speed of cutting threads.
|
 |
|
Tap Wrench with Ratchet No 1 Number: 1 Fittings: 1/8-3/8, 3mm - 10mm To be used with our hand taps to increase the speed of cutting threads.
|
 |
|
29pc Hand Tap Set Metal set containing taps ranging from M3-M12 with a first, second and third cut tap in each size. Set also contains 7 HSS drills and 1 no1.5 tap wrench.
|
 |
|
21pc Hand Tap Set Metal set containing taps ranging from M3-M12 with a first, second and third cut tap in each size.
|
 |
|
Machine Flat Bits Fully hardened high performance drill bit with centre point, titanium coated for longer life. For use in wood and wood like materials only. The dimensions listed in brackets are the metric equivalents.
|
 |
|
Machine Wood Drills Fully hardened, high performance drill bits with centre point. For use in wood and wood like materials only.
|
 |
|
Milling Drill For use in mild steel, aluminium and wood
|
 |
|
Hinge Drills (TCT) Hardened high performance hinge drills with tungsten carbide tip. For use in wood and wood like materials only.
|
 |
|
Hinge Drills (HSS) Hardened high performance hinge drills with centre point. For use in wood and wood like materials only.
|
 |
|
Wood Countersinks Wood countersink, complete with drill bit and matching key. For use in wood and wood like materials only. Dimensions listed below are drill diameter x countersink diameter.
|
 |
|
5pc Countersink Set Wood countersink set, complete with drill bit and matching key. Set Contains: 3/4/5/6mm countersinks. For use in wood and wood like materials only.
|
 |
|
Router Bit Set Fully hardened, extremely strong, high performance router bits with tungsten carbide tips. For use in wood and wood like materials only. Straight Bits: 6.35 x 6mm / 6.35 x 12mm / 6.35 x 16mm / Grooving Bit 6.35 x 12.7mm / Flush Trim Bit 6.35 x 12mm / Dovetail Bit 6.35 x 12.7mm Shaped Bits: Chamfer Bit 6.35 x 32mm / Core Box Bit 6.35 x R6.3mm / Cove Bit 6.35 x R6.3mm / Rounding Over Bit 6.35 x R6.3mm / Rounding Over Bit 6.35 x R9.5mm / Roman Ogee Bit 6.35 x R4mm.
|
 |
|
Forstner Bit Set TCT 5pc forstner bit set Set contains - 15,20,25,30,35mm forsner bits
|
 |
|
Forstner Bits High performance forstner bits TCT 10-12mm are HSS For use in wood and wood like materials only
|
 |