Printable On-line Catalogue
|
Auger Bits A fully hardened, high performance drill bit with screw centre point. For use in wood and wood like materials only.
|
 |
|
SDS Auger Bits A fully hardened, high performance drill bit with screw centre point and a SDS shank. For use in wood and wood like materials only.
|
 |
|
Bi Metal Hole Saw Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron or similar materials. Check out our hole saw accessories category for arbor's, extension shanks and spare pilot drills. Arbor's are not included in the prices above.
|
 |
|
Hole Saw Accessories Arbor A ~ Suitable for use with hole saws between 14-30mm. Arbor A has a 1/4 round shank. Arbor B ~ Suitable for use with hole saws between 14-30mm. Arbor B has a 7/16 hex shank. Arbor C ~ Suitable for use with hole saws between 32-152mm. Arbor C has a 7/16 hex shank. Note: All Arbors include a pilot drill. We also have extra pilot drills available for purchase below.
|
 |
|
Hole Saw Extension Shank
|
 |
|
8pc Hole Saw Set Set contains: 20/29/35/44/51/64mm hole saws plus the 2 arbors and pilot drills required. Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron, stainless steel or similar materials.
|
 |
|
13pc Hole Saw Set Set contains: 20/22/25/32/35/38/44/51/57/64/76mm hole saws plus the 2 arbors and pilot drills required. Professional bi-metal hole saws 4/6 teeth per inch. For use in plastics, wood, cast iron, stainless steel or similar materials.
|
 |
|
Reduced Shank Drill Bits A reduced shank, hot rolled, HSS drill bit. Shank diameter varies from 8mm to 13mm. For use with steel, plastic and wood like materials.
|
 |
|
Reduced Shank Drill Bits A reduced shank, hot rolled, HSS drill bit. Shank diameter varies from 5/16" to 1/2" For use with steel, plastic and wood like materials.
|
 |
|
Blacksmith Drills (Metric) A reduced shank, hot rolled, HSS drill bit. Shank diameter reduced to 12.7mm Spiral length 90mm For use with steel, plastic and wood like materials.
|
 |
|
Blacksmith Drills (Imperial) A reduced shank, hot rolled, HSS drill bit. Shank diameter reduced to 1/2" Spiral length 90mm For use with steel, plastic and wood like materials.
|
 |
|
TCT Core Drills Heavy duty, Tungsten carbide tipped core drills. For cutting fast clean holes in concrete, brick & aerated block.
|
 |
|
Core Drill Accessories Adaptors can be used with any of our TCT core drills. A pilot drill must be bought with the adaptor if you don't already have any.
|
 |
|
Diamond Core Drills Diamond core drill - laser welded For cutting fast clean holes in concrete, brick & aerated block.
|
 |
|
Diamond Core Drill Set 11PC Turbo Diamond Core Drill Set Laser welded Contains dry diamond core drills 38 x 150mm - 52 x 150mm - 65 x 150mm - 117 x 150mm - 127 x 150mm Short and long SDS+ adaptors Short and long hexagon adaptors for use with 1/2" chuck A-taper pilot drill 200mm long Drift key
|
 |
|
Diamond Core Drill Accessories Adaptors can be used with any of our TCT core drills. A pilot drill must be bought with the adaptor if you don't already have one.
|
 |
|
Metal Cutting Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Metal Grinding Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Stone Grinding Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Stone Cutting Discs Dimesions listed below are, diameter x thickness x bore.
|
 |
|
Diamond Cutting Discs for Tiles High quality, laser welded, dry cutting disc. Offers significantly better performance than standard cutting discs. Dimesions listed below are, diameter x bore.
|
 |
|
Diamond Cutting Discs for concrete and brick High quality, laser welded, dry cutting disc. Offers significantly better performance than standard cutting discs. Dimesions listed below are, diameter x bore.
|
 |
|
19pc HSS Metal Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
21pc HSS Metal Set Contains sizes 1/16" - 3/8" increasing in increments of 1/64" For drilling steel, plastic, wood and similar materials.
|
 |
|
25pc HSS Metal Set Contains sizes 1.0mm - 13.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
29pc HSS Metal Set Contains sizes 1/64" - 1/2" increasing in increments of 1/64" For drilling steel, plastic, wood and similar materials.
|
 |
|
50pc HSS Metal Set Contains sizes 1.0mm - 6.0mm increasing in increments of 0.1mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
41pc HSS Metal Set Contains sizes 6.0mm - 10.0mm increasing in increments of 0.1mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc Hss Flat Set Contains sizes 1/64 - 1/4 increasing in increments of 1/64 For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc HSS Flat Set Contains sizes 1.5mm - 6.0mm increasing in increments of 0.5mm. Also contains sizes 3.2mm and 4.8mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc HSS Flat Set Contains sizes 2.0mm - 8.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc HSS Flat Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc Dial-A-Drill HSS Set Contains sizes 1/16 - 1/4 increasing in increments of 1/64 For drilling steel, plastic, wood and similar materials.
|
 |
|
13pc Dial-A-Drill HSS Set Contains sizes 1.5mm - 6.5mm increasing in increments of 0.5mm. Set also includes sizes 3.2mm and 4.8mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc Dial-A-Drill HSS Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
170pc HSS Drill Magazine Contains sizes 1.0mm - 10.0mm, increasing in increments of 0.5mm. You will get 10 of each size ranging 1.0mm - 8.0mm. You will get 5 of each size ranging 8.5mm to 10.0mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
7pc HSS Flat Set Contains sizes 1.5/2/3/4/5/5.5/6mm For drilling steel, plastic, wood and similar materials.
|
 |
|
99pc HSS Drill Magazine (Titanium coated) Contains sizes 1.0mm - 10.0mm. You will get 16 of 1.5mm, 2.0mm. 15 of 2.5mm. 10 of 3.0mm, 3.2mm. 8 of 3.5mm, 4.0mm. 3 of 4.5mm, 5.0mm and 2 of 5.5mm, 6.0mm, 6.5mm, 8.0mm, 10.0mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
19pc Cobalt Metal Set Contains sizes 1.0mm - 10.0mm increasing in increments of 0.5mm. For drilling steel, plastic, wood and similar materials.
|
 |
|
99pc Cobalt Magazine Contains sizes 1.0mm - 10.0mm. You will get 16 of 1.5mm, 2.0mm. 15 of 2.5mm. 10 of 3.0mm, 3.2mm. 8 of 3.5mm, 4.0mm. 3 of 4.5mm, 5.0mm and 2 of 5.5mm, 6.0mm, 6.5mm, 8.0mm, 10.0mm. For drilling steel, plastic, wood and similar materials.
|